The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
Various topics related to sustainability in plastics, including bio-related, environmental issues, green, recycling, renewal, re-use and sustainability.
Despina Fragouli, Ilker S. Bayer, Anese Attanasio, May 2012
We present a scalable, inexpensive and green process to render cellulosic sheets waterproof with additional functional properties (magnetic, photoluminescent, antibacterial, etc.). The fibrous cellulose-based sheets are treated in their final, dry phase, with a huge potential economic impact in the manufacturing industry. Our method is based on the impregnation of cellulose sheets with acrylate monomers and micro or nano-scale functional fillers solutions, which polymerize as soon as they come in contact with the fibers. The formed polymeric nanocomposite creates a cladding around each individual fiber and not an overall coating onto the cellulose sheets. The treated cellulose fibers can be still recycled due to biodegradability of the used polymer.
Nazbanoo Noroozi, Jaclyn A. Thomson, Laurel L. Schafer, Savvas G. Hatzikiriakos, May 2012
The viscoelastic behaviour of a number of commercial and newly synthesized linear biodegradable polyesters - poly (?-caprolactone) (PCLs) with different molecular characteristics was investigated using both rotational and capillary rheometry. The variation of the zero-shear viscosity and relaxation spectrum with molecular weight was studied in detail. The PCL processing instabilities were studied by capillary extrusion using a number of capillary dies having various diameter and length-to- diameter ratios. Sharkskin and gross melt fracture was observed at different shear rates depending on the molecular characteristics of the resins and the geometrical details of the capillary dies.
In this article, different strategies to control the localization of spherical silica particles in Poly(lactic acid)/ Low density polyethylene blends were studied. These strategies include different sequences of addition of components and compatibilization. Results show that using these different strategies, the controlled localization of silica particles in either the matrix or in the dispersed phase can be achieved. Long processing times used in this study show that the observed localization is stable and does not change with further processing.
Andrea Siebert-Raths, Hans-Josef Endres, Sicco de Vos, May 2012
Next to the established packaging market the interest for biopolymers in technical application increases more and more. Especially the technical industry is interested in substituting oil-based polymers with biopolymers. In view of that, the focus of the work described here was on optimization of injection molding of polylactide (PLA) in order to improve material performance for technical applications. Furthermore, the effects of poly-D-lactide (PDLA) as nucleating agent, fibers and modifiers on material properties (e.g. heat resistance, mechanical properties) are reported.
Recyclable, recycled-content, or bio-based plastics packaging will require more than just the right technologies and materials for sustained growth. Sustainable packaging acceptance and use will also require increasing the number of informed, enthusiastic retailers and packaging consumers interested in being “greener.” In short, their positive attitudes must be turned into buying and recycling behaviors. This paper focuses on one way in which packaging producers are drawing consumers’ attention to the recycled-content, recyclability, or bio-basis of new plastic packaging. Simple messages on the packaging itself not only can clarify green claims about the packaging, but can also serve as calls for consumer action. This paper considers the effectiveness of various messages and, referencing the U.S. Federal “Green Guides,” considers the ways in which a clear, honest sustainability claim can be communicated to both informed and skeptical audiences.
Currently, the light has shed on the green composite from the view point of environmental protection. Jute fibers are natural fiber superior on light weight, low cost and environmental friendly corresponding to the green composite materials. Meticulously, fibers of polylactic acid (PLA) thermoplastic biopolymer were micro braided around jute spun yarns and paralleled configuration with jute. The pultrusion experiments were done with jute/PLA yarns and combined with glass fiber yarns to fabricate the tubular composite. Impregnation quality was evaluated by microscope observation of the pultruded cross-sections. The flexural mechanical properties of the beams were measured. The jute/PLA tubular pultrude composite using the parallel configuration of yarn showed the highest bending strength 28.3 MPa and modulus 15.4 GPa with the filling ratio 130% and volume fraction 52%.
Hanjian, Zhou Yingguo, Yan Chenguang, Cui Zhixiang, Wang Xiaofeng, Liu Chuntai, May 2012
The environmental stress cracking (ESC) behavior of injection molded polycarbonate (PC) plates in carbon tetrachloride (CCL4) was investigated. Molecular orientation was determined by birefringence measurement, which was used to study the effect of microstructure on crack development. It has been found that crack occurred in the edge surface of the molded PC plates after immersed in CCL4. The crack formation and location was correlated with molecular orientation and residual stresses of the parts. The effects of processing conditions on ESC behavior of molded PC parts were also elucidated in terms of microstructural analyses.
Bonnie J. Bachman, Shristy Bashyal, Margaret Baumann, May 2012
In the past green business evolution among business organizations has gone through “three waves of change” (Makeower, 2009, p. 12). In the 1960s businesses started being green with the notion “Do no harm” and companies started minimizing the environmental impacts (Makeower, 2009, p. 12). In the 1960s, companies mainly focused on pollution control that included stopping illegal activities such as “spewing smokestacks and drainpipes” (Makeower, 2009, p.12). In the 1970s, the U.S. Environmental Protection Agency and similar agencies were formed in the United States and in the other countries with standard laws about pollution of air and water (Makeower, 2009, p. 9). The second wave occurred in the 1980s and emphasized “Doing well by doing good” as companies realized that taking a few proactive steps could reduce costs and enhance a company’s image (Makeower, 2009, p. 10). Later, companies started being concerned about issues like pollution prevention, waste reduction, and energy efficiency. Then in the 1990s came the third wave: “Green is green” (Makeower, 2009, p. 12). During the third wave companies paid more attention to the environmental issues. As stated by Makeower (2009), “Companies recognized that environmental thinking can do much more than improving the bottom line i.e. it can help grow the top line through innovation, new markets, and new business opportunities”. In September 1996, the ISO 14001 environmental management system was issued and applied, establishing “a baseline set of rules for how companies should be organized environmentally” (Makeower, 2009, p. 10). According to Makeower (2009), “as companies scrutinized their operations, they understood how much of their environmental impacts were affected by their external stakeholders hence Supply-chain Environmental Management became the watchword after that the concepts of industrial ecology, zero waste, and carbon-neutrality emerged” (p. 11). Today companies are finally concerned about the “S-word, sus
Shia-Chung Chen, Wei-Yao Hsu, Sung-Wei Huang, Hsin-Shu Peng, May 2012
In the recent years, with the increasing demand of energy and the rapid consumption of fossil fuels, a variety of alternative energy are rapid development to replace traditional energy. Solar power, is one of the best sustainable energy and nowadays widely used for generating electrical power. In this study, the solar condenser of converted efficiency is investigated into conventional and injection compression molding process with various parameters. The experimental results show that the higher mold and melt temperature can increase converted efficiency of condenser during conventional injection molding (CIM) process. In all conventional molding parameters, the best converted efficiency can enhanced 51.4 W/m2 (7.60%). The injection compression molding (CIM) can achieve better efficient performance than conventional molding process.
Jeff Munro, Jose M. Rego, Lisa Madenjian, Kim Walton, May 2012
Introduced in 2006, INFUSE™ Olefin Block Copolymers (OBCs) have since been explored in many markets and application areas, including soft compounds. Key molecular design elements were identified as critical factors to the manufacturing of thermoplastic elastomers (TPE) with the required property balance. This paper is aimed at providing an overview of the main considerations for formulating OBCs for soft compound applications and highlights the sustainability advantage of OBC compounds relative to styrenic block copolymer compounds.
C. Chau, J. Williams, S. Solovyov, T. Powers, P. Koch, May 2012
Polylactic acid and polypropylene were melt blended and extruded into 3-10 mil films. Differential scanning calorimetry studies showed the polymer blends, unlike the neat PP and PLA materials, exhibited crystallization exotherm in heating scans with a crystallization point varied with the ratio of PLA to PP. This melt crystallization behavior was enhanced with the increase of the content of PLA from 25 to 75%. The polymer blends also showed multiple melting points ranging from approximately 140 to 175°C depending on the ratio of the two polymers and the heating rate. The formation of a new crystallization temperature, the shifting of the melting points, and/or the formation of new melting points suggested some compatibility between PP and PLA. Upon uniaxial stretching, the originally translucent films showed strong stress-whitening phenomena with widespread porous structure developed in the whitened region. SEM showed fibrils with a typical diameter of 2 micron and voids or pores of approximately 5 micron developed in the whitened region. The partial compatibility between PLA and PP could have contributed to the homogeneity of the stress-whitening and the porous structure in the film. The porous films provided two folds or higher increase in oxygen transmission rate depending on the material composition and draw ratio. The structural development and the potential use of the porous PLA/PP films in packaging application are discussed.
The application of thermal butt-fusion joining technology to polyvinylchloride (PVC) piping has had a major impact on the waterworks market over the last seven years. The combination of a familiar, industry standard piping material with a joining method that lends itself to cutting edge trenchless installation methods has seen rapid expansion in application and use in the water and wastewater industries. Trenchless methods that involve the installation of a new pipeline, or ‘whole pipe replacement,’ include horizontal directional drilling (HDD), sliplining, and pipe bursting methodologies. These methods are characterized by the installation of a new pipeline or conduit that does not derive pressure capacity, strength, or design life from any previously installed or “host” infrastructure. Polyvinylchloride (PVC) pipe with the use of butt-fused PVC pipe technology has made great strides in these applications, due to its high tensile strength capacity, high hydrostatic design basis, good chemical compatibility, and abrasion resistance. The use of butt-fused PVC pipe has expanded the capabilities of thermoplastic pipe within these methodologies, allowing greater pull-in lengths, depths, and pressure capacities to be achieved. This paper will discuss the materials and technology that are allowing for this expansion as well as highlight the direct impact on the installation methodologies through several recent case study examples. Case studies will include a record setting horizontal directional drill for a water transmission main installation; a large diameter force main rehabilitation through the use of sliplining; and a pipe bursting replacement program for potable water distribution mains, all in North America. This information will illustrate the innovative nature of this joining methodology, flexibility and range of the current whole pipe replacement offerings, and demonstrate how they are growing in use as end users benefit from this unique application of PVC pipe.
Industrial markets are ready to take advantage of direct to product decorating - printing to substrate. When is it time? Now is the time. The advantages are numerous: Inventory Reduction - on demand printing, Personalization - adding a new product level to current product line and added value to increase the bottom line, Green - very little waste and numerous recycling programs for consumable items. With advantages being clear, moving into the digial printing world requires a little preparation. Starting with how to select the appropriate printer from printhead selection to ink delivery system, ink selection, down to software. All key components in successfully moving into digitally printing. With a range of printing platforms from flatbed printers, high speed single pass systems to multipass systems - there is a solution for all decorating types. Taking the process step by step, being knowledable about the systems available and asking the right questions will put your company on the path to successful digital decoration in the production environment.
The Non-Conductive Vacuum Metallization (NCVM) process has become a mainstream metallization technology to achieve metallic like appearances on the surfaces of plastics used in wireless electronic devices while maintaining radio frequency (RF) functionality of the internal antennas. The impact on device performance and reliability of NCVM coatings has been discussed based on the most common failure modes and industrial testing standards. This paper discusses the effects of environmental conditions as well as construction variation of NCVM systems as they relate to various customer- impacting failure modes such as discoloration/corrosion, delamination and RF interference.
Discriminating between microscopic regions of component polymers that have chemically similar structures enables characterization of the phase-inversion composition of a biobased immiscible blend.
Modifying poly(3-hydroxybutyrate) with acryloyloxyethyl isocyanate increases the thermal decomposition temperature by 27°C and improves its mechanical properties.
Company wide protocol: Establish a central data collection/analysis system Build continual improvement into program Inter-plant material exchange Reduction in material costs Reduction in landfill costs
The Coca-Cola Company: 2020 Vision; Sustainability: Packaging Material Strategy; PET Recycle: Bottle to Bottle and Bottle to Others; PlantBottle® Packaging: Close the Loop - Renew and Recycle
Why is Packaging Important? Fundamentals & Definitions of Bio-Plastics Material Innovations from Dow Bio-Plastics and the Environment Bio-based Sustainability End of Life (Current and Future/New) FTC Guidelines Considerations Conclusions
Yuan Yuan, Yaru Han, Suming Li , Zhongyong Fan, March 2012
Bioresorbable composites prepared for mechanical performance are promising candidates as cardiovascular stent material.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
