The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
Bai-Jian Wei, Yu-Sung Chang, Yuan Yao, Kai-Hong Wang, January 2015
Effective real-time measurement of local preform permeability during resin transfer molding manufacturing is critically important for both product quality control and numerical process simulation.
Costas Panayiotou, Ioannis Zuburtikudis , Apostolos Baklavaridis, January 2015
Reinforcing multiphase porous biopolymer composites with clay platelets increases their mechanical strength, making them a promising candidate for future tissue engineering applications.
Branden Lewandowski, Steven Ott, Louis Reifschneider, Victoria Finkenstadt, Zengshe Liu, Brent Tisserat, January 2015
Poor interfacial binding reduces the mechanical properties of 3D printed tensile bars prepared from filaments of blends of biomaterials with polylactic acid.
Charalabos Doumanidis, James Seferis , Vasileios Drakonakis, December 2014
Layered carbon-fiber-reinforced composites with a fractal-structured interlayer of carbon-nanotube-reinforced nanofibers show a high strength/weight ratio.
Xun Pan, Tao Liu, Zhenhao Xi, Tian Xia, Ling Zhao , Chaoyang Fan, November 2014
Reactive extrusion with pyromellitic dianhydride and controlled foaming of the melt with supercritical carbion dioxide produce high-melt-strength poly(ethylene terephthalate) foam.
Kuruvilla Joseph, Saritha Appukuttan, November 2014
The varying organic modification, lattice spacing, and concentration of added nanoclays have a profound effect on the constrained polymer volume in chlorobutyl rubber nanocomposites.
A smaller extrusion screw produces a recycled product with adequate mechanical and thermal properties for reuse in electronic and electrical applications.
Separating a linear and a long chain branched impact polypropylene copolymer (ICP) into their subcomponent phases reveals the long chain branching and microgel content of each phase.
Saptarshi Majumdar, Anitha Mogilicharla, Kishalay Mitra, October 2014
A validated mechanistic kinetic model for a long-chain branched polypropylene system is proposed and optimized for controlled branching for the first time.
Flexible laminates based on silicone rubber promote high delamination resistance in stator bar insulation, offering a promising approach for the manufacture of high-voltage generators with extended lifetimes.
Wei-Sheng Guan, An-Fu Chen , Han-Xiong Huang, October 2014
Investigation into the high-shear-rate rheology of polystyrene, polypropylene, and linear low-density polyethylene melts yields their true viscosities and sheds light on their rheological behavior.
Using a compatibilizer in the presence of hyperbranched polyester enables simpler and more cost-effective melt compounding of polypropylene/natural montmorillonite nanocomposites.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
