The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
As American vehicle fuel efficiency requirements have become more stringent due to the CAFE standards, the auto industry has turned to thermoplastic-fiber composites as replacements for metal parts to reduce weight while simultaneously maintaining established safety standards. Furthermore, these composites may be easily processed using established techniques such as injection molding and compression molding. The mechanical properties of these composites are dependent on, among other variables, the orientation of the fibers within the part. Several models have been proposed to correlate fiber orientation with the kinematics of the polymer matrix during processing, each using various strategies to account for fiber interactions and fiber flexing. However, these all require the use of empirical fitting parameters. Previous work has obtained these parameters by fitting to orientation data at a specific location in an injectionmolded part. This ties the parameters to the specific mold design used. Obtaining empirical parameters is not a trivial undertaking and adds significant time to the entire mold design process. Considering that new parameters must be obtained any time some aspect of the part or mold is changed, an alternative technique that obtains model parameters independent of the mold design could be advantageous. This paper continues work looking to obtain empirical parameters from rheological tests. During processing, the fiber-polymer suspension is subjected to a complex flow with both shear and extensional behavior. Rather than use a complex flow, this study seeks to evaluate and compare the effects of shear and extension on two orientation models independently. To this end, simple shear and planar extension are employed and the evolution of orientation from a planar random initial condition is tracked as a function of strain. Simple shear was imparted using a sliding plate rheometer designed and fabricated in-house, and a novel rheometer tool was developed
Mohammad F. Ahmed, Yan Li, Changchun Zeng, May 2016
The effects of blend composition and foaming conditions on polylactic acid (PLA)/thermoplastic polyurethane (TPU) blend foams were studied. Thermal behavior of the blends showed that TPU weakened crystallization ability of PLA. It was found that foam morphology was impacted by the blend composition and foaming conditions used in the study. PLA and PLA/TPU (80/20) did not demonstrate any significant foaming behavior while PLA/TPU (50/50) foamed at high temperature and pressure conditions. TPU foam morphology demonstrated temperature and pressure dependence. Interestingly enough, PLA/TPU (20/80) showed pore formation at all the operating conditions with either open cell or closed cell structures.
This paper aims to provide fundamental understandings in several issues critical to the fabrication of auxetic polyurethane (PU) foams: auxetic structure fixation mechanisms, materials characteristics essential for the successful auxetic conversion, and optimal conditions for auxetic conversion. The chemistry, microstructure and thermomechanical properties of starting PU foams for auxetic foam manufacturing were thoroughly analyzed. This is followed by the auxetic convertibility study of these three foams. Mechanisms for fixing the structure were elucidated and the windows for processing were interpreted in the context of polymer relaxation. Guided by these understandings, we finally report an ultrafast, room-temperature process for auxetic PU foams manufacturing that can be completed in as little as several seconds.
Sukjoon Na, Long Nguyen, Sabrina Spatari, Grace Y. Hsuan, May 2016
This study employed the J-integral approach to investigate the effect of recycled HDPE and nanoclay contents on the long-term stress cracking behavior of pristine HDPE. This behavior was conventionally approached by using stress intensity factor K, which defined the stress cracking behavior as two failure mechanisms: creep and slow crack growth (SCG). Unlike the conventional approach, the J-integral method identified the short-term failure prior to the creep failure. By integrating the short-term and SCG failure behavior, this study derived a correlation between Jc and SCG. The SCG behavior of recycle-blended materials without nanoclay was governed by Jc which decreased as the recycled contents increased. The decrease of Jc led to a reduction in SCG failure time. In contrast, the addition of nanoclay (up to 6-wt%) reduced Jc and stress relaxation of the material, subsequently extending the SCG failure times.
This study set out to apply gas counter pressure (GCP) in the injection molding process. By importing gas through the ends of the cavity, the melt was exposed to a melt front pressure, which, together with the packing pressure from the screw, is supposed to reduce product shrinkage. The aim was to investigate the impacts of GCP on the process parameters via the changes in machine feedback data, such as pressure and the remaining injection resin. This study also used a relatively thin plate-shaped product and measurements, such as the photoelastic effect and luminance meter to probe into the impacts of GCP on product residual stress, while a relatively thick paper-clipshaped product was used to see the impacts of GCP on shrinkage in thick parts. According to the experimental results, the addition of GCP resulted in increased filling volume, improvement of product weight and stability, as well as effective reduction of section shrinkage, which was most obvious at the point closest to the gas entrance. The shrinkage of the sections parallel and vertical to the flow direction was proved to be reduced by 32% and 16%, respectively. Moreover, observations made via the polarizing stress viewer and luminance meter showed that the internal residual stress of a product could be effectively reduced by a proper amount of GCP.
Kezhen Yin, Lei Zhu, Andrew Olah, Eric Baer, Lionel Flandin, Donald Schuele, May 2016
Advanced film capacitors require polymers with high thermal stability, high breakdown strength, and low loss for high temperature dielectric applications. In order to fulfill such requirements, two polymer multilayer film systems were coextruded via a forced assembly technique. High glass transition (Tg) polycarbonate (HTPC) and polysulfone (PSF) were layered with poly(vinylidene fluoride) (PVDF), respectively. The PSF/PVDF system was more thermally stable than HTPC/PVDF system. For dielectric properties at high temperature, PSF/PVDF system exhibited higher breakdown strength and lower hysteresis compared with HTPC/PVDF system. These results demonstrated that PSF/PVDF was a superior system to HTPC/PVDF for high temperature dielectric capacitors.
Minh-Phuong Tran, Pengjian Gong, Christophe Detrembleur, Jean-Michel Thomassin, Piyapong Buahom, Mehdi Saniei, Samuel Kenig, Chul B. Park, Seung-Eon Lee, May 2016
Radiative thermal conductivity has long been recognized as an important heat transfer mechanism. In the literature, a heat transfer of 20% to 40% through low density thermal insulation materials has been reported. Adding particles such as carbon nanotubes can significantly reduce the radiation by absorption and scattering. In addition to its cost effectiveness and easy processability, the expanded graphite was expected to absorb thermal radiation more efficiently than carbon nanotubes with the same volume content. Using the Rosseland approximation, we quantitatively undertook a first-time study of how expanded graphite significantly reduces the radiative thermal conductivity. We found that particle-added polystyrene foams with a 0.018%vol of expanded graphite nanoplatelets and a 25-fold volume expansion ratio could block 92% of the overall thermal radiative thermal conductivity. A 19.6 mW/m.K of the total thermal conductivity of these foam composites was experimentally achieved. This was due to the extremely high volume expansion (>40- fold) and to the efficiency in attenuating the thermal radiation via the polymeric foams. When we used the Glicksman model for thermal conduction together with the Rosseland approxiamtion, the calculated values of the total thermal conductivity were all in good agreement with the experimental data, and the tolerance was less than 5% (<2 mW/m.K).
Mechanical properties and thermal properties of cellulose- PLA composites were measured. The relation between molecular structure of additives and an addition effect on cellulose-PLA was investigated. By examining for combination of three kinds of cellulose material and four kinds of additive of different features, effects of additives to PLA and cellulose and their mechanism were revealed. It was found there was the most improvement of mechanical properties using hydrophobic additives with many functional groups. It was assumed that reactive additives made a crosslinked structure in cellulose-PLA composite.
Mirko Albrecht, Ronald Dietz, Michael Gehde, May 2016
Due to the wide range of properties of plastics (e.g. low density), more and more conventional materials are substituted by polymer materials. Complex requirement profiles on technical parts increase the demand for joining processes that enable the reliable joining of otherwise incompatible thermoplastics. In this case, material bonded connections are approaching their limits. In the following study two incompatible thermoplastic polymers were welded by using polymer blends that are compatible to both components. Industrially relevant thermoplastics polyethylene (PE) and polyamide 12 (PA12) were chosen to demonstrate the potential of an innovative joining technology.
Katharina H. Kurth, Esme Grünewald, Dietmar Drummer, May 2016
Polymer bonded magnets are mainly used in sensor or electric drive applications. Depending on the particular application, certain requirements of the multipolar magnets, such as high peak flux density or accurate pole length of each pole, must be assured. Multipolar bonded magnets can be economically produced in the injection molding process. Several parameters, such as the compound composition, the mold design and the processing properties affect the final properties of these magnets. This paper deals with the influences of processing parameters on the magnetic properties, in particular the pole length and maximum radial flux density, of poleoriented molded rings. It can be shown that the pole length in the area of injection points and weld lines is strongly influenced by their existence. Further, the accuracy of the pole length is influenced by the investigated processing parameters.
Lin-Qiong Xu, Yong-Qing Zhao, Xiang-Fang Peng, May 2016
The poly(lactic acid)/ethylene methyl acrylate copolymer (PLA/EMA) blends were melt blended with by a twin-screw extruder. The phase morphologies, mechanical, and rheological properties of the PLA/EMA blends with three weight ratios were investigated. The results showed that the addition of EMA improves the toughness of PLA at the expense of the tensile strength to a certain degree. All the PLA/EMA blends display typical droplet-matrix morphology, and different characteristic linear viscoelastic properties in the low frequency region, which were investigated in terms of their complex viscosity, storage modulus, and Cole-Cole plots. The interfacial tension between the PLA and EMA is calculated using the Palierne model conducted on the 80/20 PLA/EMA blend, and the calculated result is 3.3 mN/m.
Stephan Eilbracht, Ruth Jackowiak, Michel Renaud, May 2016
Extrusion blow molding is an efficient way to produce hollow parts with complex geometry. In this paper a jounce bumper geometry is investigated and numerical simulations are compared with experimental data. In addition a parametrical study is performed to visualize the influence of the processing conditions on the resulting wall thickness distribution. An analytical procedure is derived to correct overestimation of stretching during inflation. This is caused by the membrane approximation approach that is implemented in the simulation software. Accuracy of the simulation results is within the variation of the measurements for thin areas and shows 5 % up to 15 % underestimation in thick areas. Furthermore, a parameter study is employed to correlate initial parison geometry with final wall thickness distribution. Thus the choice for suitable processing conditions in terms of initial parison geometry aiming for a certain wall thickness distribution is accelerated.
Conformal cooling systems are an effective method of removing heat from an injection mold. Careful consideration is required with respect to its design to ensure an adequate flow rate through all sections and an even mold temperature distribution achieved. Using simulation to predict the complex thermal environment of a conformally cooled mold can therefore become an important design tool. In this work experimentally measured temperatures from within a conformal cooled mold insert are compared to that predicted by an Autodesk Moldflow Insight transient cooling analysis for a number of materials. The results showing that the key mold temperature trends can be accurately predicted, enabling its use as a design tool for complex conformal cooling geometries.
Hans-Peter Heim, Jan-Michael Geck, Stefan Jarka, May 2016
The demand for light-weight construction and economic efficiency has led to the development of light-weight construction strategies, i.e., multi-material design, in many areas of industry. Here, the property profiles of the composite partners are utilized synergetically. Plastic-metal hybrid composites possess a large amount of potential in this regard owing to the weight reduction that can be achieved in the composite and the simultaneous enhancement of the mechanical properties. Hybrid components have already proven their potential in large structural components for the bodies of cars, and are already employed in series. A particular difficulty arises in the case of applications where sealing is required between the composite materials. Achieving a firmly bonded connection between the differing materials is a tough challenge, especially since exposure to different temperatures and media can alter the composite properties significantly. This was examined and evaluated in expansive test series.
Christoph Burgstaller, Bernhard Riedl, Wolfgang Stadlbauer, May 2016
The aim of this work was to investigate the effects of the composition on the properties of LDPE-PA6 blends with an emphasis on the addition of EVA, because this material is often used as interlayer in packaging films. Furthermore, also the effects of additional compatibilization on the blend properties should be investigated. We found, that the addition of EVA alone shows some compatibilizing effects in blend properties, like impact strength and viscosity. Further improvements can be gained by adding prefabricated additives, like maleic anhydride grafted polyethylene and ethylene vinyl acetate, while the in situ production of such additive shows some reduced effects, likely due to some reduced accessibility of the EVA component for the in-situ grafting. Nevertheless all the investigated approaches show some effectiveness in compatibilisation, which will help to reuse such materials in other applications.
Keisuke MAEDA, Chikako OHSARA, Koji YAMADA, Mikihiko FUJIWARA, Kazushi YAMADA, Masaya KOTAKI, Hiroyuki NISHIMURA, May 2016
In this research, rubber with two different molecular weights was added to thin-wall injection molded polypropylene (PP). The effect of rubber addition on structure and property distribution of these thin-wall injection molded polypropylene (PP) samples was investigated using Polarized Optical Microscopy (POM), Differential Scanning Calorimetry (DSC), Wide Angle X-ray Diffraction (WAXD), a high speed tensile test, and a micro-cutting method. The thin-wall injection molded PP with high molecular weight with rubber exhibited the higher crystalline orientation and ?-crystalline fraction as compared to other samples. Micro cutting method results revealed that the addition of rubber to PP samples led to lower shear strength. The relationship between structure and property distribution of thin-wall injection molded PP is discussed on the basis of these results.
Lukas J.L. Duddleston, Andrew T. Puck, Alexander Harris, Neil P. Doll, Tim A. Osswald, Elio de Stephanis, May 2016
Selective laser sintering, a 3-dimensional printing technique, converts powdered thermoplastic resins, e.g. polyamide 12 (nylon 12), into end-use parts by using a laser to melt and fuse the particles. In this layer-by-layer additive manufacturing process, the powder is both the raw material and the mold. Therefore, unsintered powder can be recovered and recycled in subsequent builds to significantly decrease net costs. To improve blending protocols, the powder quality, i.e. the degree of degradation, was quantified using differential scanning calorimetry. Contrary to the work of others, the results suggested that the sensitivity of differential scanning calorimetry to small changes in molecular weight could reproducibly detect small changes in oven-aged (degraded) powder.
Wen-Shiue Young, Wei Gao, Xue Chen, Stephen King, May 2016
It has been challenging to characterize the molecular weight distribution of water soluble cationic polymers, such as polyethylenimine (PEI), due to intramolecular electrostatic interactions, adsorption, ion exchanges, ion exclusion and ion inclusion. In this study, several commercial PEIs with various molecular weights and architectures were examined using Gel Permeation Chromatography (GPC) with online multi-angle light scattering (MALS) detection. Good GPC separation for medium-to-low molecular weight (< 100 kDa) PEIs was achieved by using a cationic column set in an acidic buffer condition. However, for high molecular weight (> 500 kDa) and branched PEI, non-ideal GPC separation, manifested by anomalous late elution of high molecular weight chains, was detected by MALS at longer elution times. Dynamic light scattering was utilized to examine the solution behavior of PEIs in the GPC buffer condition.
Amin Sedighiamiri, Julien Cathelin, Joel Thambi, Erik Stam, May 2016
Fiber reinforced thermoplastic (FRTP) materials offer great potential for, among others, weight and cost reduction in a wide range of applications. In this paper, consequences of fiber orientation-induced anisotropy (due to injection molding process) in the development of FRTP parts as well as predictive engineering techniques for part performance evaluation are discussed. A coupled simulation methodology, referred to as Through-Process Modeling, will be used to predict the processing-morphology-properties relation in FRTP parts. This method enables taking morphological information into account and results in improved simulation accuracy and, ultimately, an accelerated development cycle.
Elmar Moritzer, Matthias Hüttner, Bernd Henning, Manuel Webersen, May 2016
Numerous established procedures exist for non-destructive material testing; the goals of such tests typically include detecting material defects, such as cracks or pores. However, material aging, which has a significant influence on a material’s properties, is also critical to consider for polymers in particular [1]. In order to establish the existence of possible aging effects, corresponding characteristic values are determined with destructive tests [2]; such methods, however severely limit the possibility of preventative maintenance procedures. Therefore, the following contribution will introduce a method with which the effects of aging on polymeric materials can be determined non-destructively. To do so, the hygrothermal effects on samples of artificially aged Polyamide 6 will be investigated and macromolecu-lar changes identified using ultrasonic testing.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
