The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
A 1:20 downscale of an internal batch mixer (60mL total volume), the Minibatch mixer (3 mL total volume), requiring only 2g per blend sample, has been developed for small-scale blending of specialty polymers and nanocomposites. The morphology of samples processed by this new miniature mixer is compared to other labscale equipment such as the 60mL internal batch mixer and the Alberta Polymer Asymmetric Minimixer (APAM). Immiscible blends showed a spherical dispersed phase structure and uniform distribution throughout the blend; however, the dispersed phase particle size was large in comparison to the other mixers. Vapor grown carbon fiber (VGCF) nanocomposites were better dispersed and more homogeneous compared to those prepared using the 60mL batch mixer and the APAM. The large surface to volume ratio of this new mixer plays an important role in the heat transfer mechanisms and thus may affect flow patterns occurring in the Minibatch mixer. Simulations using Polyflow software showed that the flow pattern in the 3mL Minibatch is similar to the 60mL batch mixer but that the temperature rise due to viscous dissipation is not as large for the new miniature mixer.
Yew Weng Loke, Shu Beng Tor, Jung-Hoon Chun, Ngiap Hiang Loh, David E. Hardt, May 2007
The mass-production of microfluidic devices must be done in a reliable manner. In this study, toolings used to reproduce microfluidic features on cyclic-olefincopolymer (COC) and polymethyl-methacrylate (PMMA) polymers by amorphous metallic alloy and silicon inserts were compared. Both toolings were used in micro injection molding. Findings indicate that the alloy was mechanically more suitable as mold inserts, whereas silicon had better surface roughness. COC samples showed comparable geometrical replication of microfluidic features compared to PMMA.
To improve our understanding of granular flow in the solids-conveying zone of a single-screw extruder, a discrete particle model has been developed. The discrete particle approach allowed us to simulate polymer compaction without using the isotropic stress assumption used by continuum models. An elastic-fully plastic contact force displacement model was validated by simulating HDPE and PS under compaction in a batch cell and comparing against reported data in the literature. The particle model and experimental results showed good agreement for PS which exhibited elastic behavior up to the tested limit of 12 MPa. The simulation for HDPE showed marked deviation above 4 MPa, over predicting the plastic dissipative losses. The extruder simulations showed exponential pressure development along the axial length of the screw, similar to continuum models, but indicated that bulk density in the screw was affected by attributes of the flow field besides just pressure. The nonisotropic stress distribution of the solids in the screw was examined, with the stresses found to be concentrated at different boundaries depending on pressure development.
Helmut Potente, Hans-Peter Heim, Ralf Schlottmann, May 2007
The design of extrusion dies is frequently based on knowledge and experience of the designers. One very simple, rapid and low-cost means of designing a profile die is the use of scale-up rules. This paper deals with an approach to develop scale-up rules which make it possible to scale-up or scale-down existing profile geometries by means of simple equations. The following profiles are observed: rectangular channel, annular gap and pipe channel. Allowance is also made for a change in material properties in order to achieve the greatest possible variability in the die design. Neighboring areas are examined and revised by iterative procedures to avoid transverse flow between the flow channels.
By using scanning electron microscopic analysis, we fractographically examine failure modes of flexible, braiding-reinforced composite tubes under impact energy pulses. The tubes are subjected to different extents of structural constraint imposed by other catheter components. The effects of impact energy pulses and structural constraints on failure modes are qualitatively evaluated. It is practically shown that under certain extents of structural constraint, minimal impact energy input can introduce catastrophic, brittle fracture mode dominant over either fatigue fracture mode or ductile failure behavior. In an attempt to identify the root causes for the formation of observed brittle fracture phenomena, various material characterizations, including differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) are conducted on the thermoplastic elastomer material of the tubes to attest material integrity after fabrication.
The melting behavior of a poly(ether-block-amide) copolymer melt-crystallized under various quiescent, isothermal conditions was studied using differential scanning calorimetry (DSC). The structure of the crystallized copolymer was characterized at ambient temperature using wide-angle X-ray diffraction (WAXD). It was found that the hard, crystalline microdomain of the melt-crystallized copolymer only exhibited ?- or (???) crystal form associated with hexagonal habits. It was determined based on the DSC and WAXD results that the multiple melting endotherms were attributive to different origins, including the short-range ordering effect at the late stage of crystallization and the melting-crystallization event that occurred during the DSC heating scan.
Epoxy/Ni adhesives can be used as integrated circuit (IC) packaging materials due to their lower cost than epoxy/Ag adhesives with acceptable electrical conductivity. In this work, conductive epoxy/Ni adhesives were prepared by solution method and filled into holes connecting the multilayers of a novel prototype designed to be used in electronic components in circuit boards, in order to study the geometrical effects on the prototype's electrical resistance. An empirical equation was obtained for the contact resistance (Rc) measured after cure. We also show that Ohm's law adequately describes the effects of the bulk adhesive resistance (Rb) on prototype's electrical resistance.
Water-assisted injection molding (WAIM) and gas-assisted injection molding (GAIM) are two innovative process based on the conventional injection molding. Because of the difference between water and gas, the crystallization of part manufactured by WAIM and GAIM has a discrepancy. In order to compare the difference, a simplified mathematics model was created. Moreover, the simulation code was completed and numerical simulation was carried out. The simulation result shows the WAIM parts of the semi-crystallizing polymer will scarcely crystallize and have a short cooling time because of the fast cooling effects of water.
Understanding the effect of temperature is decisive to describe the deformation behaviour of viscoelastic materials. There is still no unambiguous evidence whether the elastic part of the deformation is influenced by temperature. Within the scope of this paper both viscoelastic properties and elastic deformation are investigated separately. Therefore, thermoreversible rearrangements (time-, temperature-, strain- and stress-dependent) based on dynamic, creep and relaxation experiments up to the nonlinear viscoelastic range are measured and modeled. A significant difference in the limit of linear viscoelasticity below and above the glass transition temperature is shown. These investigations can be the basis for a more effective use of thermoplastics in the future.
Mechanical recycling of waste polymeric based composites allows production of same or similar products, but in the case of vinyl wallpaper the quality of recovered material combines the cellulose component with the vinyl PVC resulting in a new composite which can have completely different applications compared with the original vinyl wallpaper.Vinyl wallpaper is generally composed of Polyvinyl chloride combined with cellulose fibre and with certain formulations a small percentage of different polymer based additives.It has been demonstrated and described in a previous presentation that this post industrial waste material can be recycled, the present paper will demonstrate that this recyclate can be claimed to be a new vinyl based composite. The present paper will also demonstrate advantages of using modified extrusion technology to recycle wallpaper continuously without degradation of base components. With properties characterisation and evaluation it will be demonstrated that this material can have different applications compared with vinyl wallpaper.
Electrically conductive graphite-filled epoxy composites were developed by solution intercalation mixing of epoxy resins with expanded graphite (EG) and carbon black (CB), followed by compression molding and curing for application as bipolar plates in proton exchange membrane fuel cells (PEMFCs). High in-plane conductivity of 200-500 S/cm compared to DOE target value of 100 S/cm was achieved with good mechanical properties. The flexural modulus, flexural strength and impact strength were 2.08×104 MPa, 72 MPa, and 173 J/m respectively. The composites also showed high glass transition temperatures (Tg ~ 141°C) and high thermal degradation temperatures (T2 ~ 415°C). Hygrothermal effects on electrical, thermal, mechanical, and chemical properties were evaluated especially under acidic conditions. The maximum water absorption was found to be 1-2 % by weight for these composites, compared to 4-5% for cured EP resins without fillers. SEM micrographs suggested no change in morphology due to reflux in water and acid.
Scott Ledebuhr, Darin Grinsteinner, Scott Snowberger, May 2007
Composite Products, Inc. continually adapts their Advantage In-Line Compounding Process to produce products that use novel composite molding tools and methods. In a recent agricultural application, a tractor cab roof combined long glass fiber thermoplastics with innovative tooling and molding methods to simultaneously maximize structure and aesthetic appearance. Additionally, significant cost and performance advantages were realized through part consolidation, material waste reduction, reduction in manufacturing steps at the OEM, and corrosion resistance. The launch of this product was achieved through the successful combination of materials, tooling and process.
Fiber length distributions were determined for long fiber polypropylene composites reinforced with carbon, glass or glass-organic fibers from pultruded pellets, chopped fiber, or in-line roving, and molded by multiple long fiber thermoplastic injection (LFT-IM) or extrusion-compression molding (LFT-ECM) processes. All processes degraded the fiber length significantly. Injection molding processes reduced fiber length by up to 90%, much more than LFT-ECM, which produced broad, asymmetrical residual length distributions, with substantial amounts of much longer fibers.
The advantages of one-stage injection stretch blow molding (ISBM) are energy efficiency and high productivity as reheating is not necessary. However, due to the complexity of operation parameters from raw material through injection molding to the end products, a conventional trial-and-error method is ineffective to predict and control this process. Hence, how to correctly integrate injection and blow molding sequentially is in a great demand. In this study, a comparative investigation between one-stage and two-stage processes is performed firstly. Then in one-stage system, the influence of various operation parameters during the injection stage on product forming is conducted numerically.
Ethylene ionomers, such as Surlyn® from DuPont™, have been the premium sealant materials for packaging applications due to their excellent seal strength and process robustness. The ethylene ionomers achieve the unique property characteristics through the development of a network morphology. In this paper the development of new ethylene ionomers will be discussed. The versatile compositions and the unique morphology of the new ionomers will be presented together with the novel gas permeability properties. Their enhanced breathability to oxygen, carbon dioxide, moisture, etc., selective permeability, and smart barrier properties will be presented.
Cyclic olefin copolymers (COC) can provide film producers and packaging converters with an opportunity to create thermoforming films. COCs are amorphous thermoplastics with excellent moisture barrier, high temperature stability and stiffness. Mono- and multi-layer examples of LLDPE-based forming films, compared against commercially available products, clearly demonstrate how well the addition of COC improves physical properties, thermoforming and packaging performance. COC improves material distribution of LLDPE formed trays. These improvements enable the formed tray to withstand higher crushing force. Enhanced performance permits possibility of down gauging.
Jan Philip Plog, Jint Nijman, Klaus Oldörp, May 2007
Car electronic components are potentially subjected to a very wide temperature range compared with electronic components in domestic appliances for example. In (very) cold regions temperatures can get as low a -60 °C and in the engine bay of a car temperatures of 100 °C and higher (near the engine) are easily reached. In cars these extreme temperatures not only put high demands on high tech components like printed circuit boards but also on the electrical wires in wire looms.We have studied the mechanical properties of PVC coated copper wire in a wide temperature range before and after subjecting the wire to an elevated temperature for a certain defined time.
E. Elif Gurel, Phil M. Peters, John Graf, May 2007
In many current Liquid Crystal Display (LCD) systems, it is required to have light diffusing components. Light diffusing components are utilized to improve uniformity in illumination and increase viewing angle. They also serve to mask artifacts. For instance, the films are used to hide injection molded or printed patterns on the light guide pipe of the display or to reduce the appearance of moiré patterns generated by the interference of the LCD pixels with other regular structures within the system. In a typical LCD display, diffusion of light is introduced into the backlight assembly by adding separate films (i.e., a stack) that are comprised of a non-diffusing substrate to which a highly irregular, diffusing surface treatment is applied or attached. In this study, we present GE’s polycarbonate film systems to generate diffuse light in a monolithic film structure utilizing bulk diffusing additives. The relationship between the material properties of the bulk diffuser and the functional properties of the films is discussed.
Mario H. Gutierrez-Villarreal, Mayra G. Ulloa-Hinojosa, Jose P.Gaona-Lozano, May 2007
Polylactic acid (PLA) film with good wettability and versatile reactivity was produced by photoinitiated grafting of N-vinylpyrrolidone (NVP) onto its surface using benzophenone (BP) as the initiator. The PLA film was melt extruded and a known amount of monomer solution containing the photoinitiator BP was deposited between two films, the assembled unit was irradiated under UV light at room temperature under nitrogen. The surface photografting parameters- grafting percent (Gp) and grafting efficiency (Ge) were obtained. The films resulting from this treatment were analyzed using differential UV spectroscopy, and water contact angle.
Wei Zhang, Hailing Yang, Ronald D. Moffitt, May 2007
Hammer-mill processed bamboo fibers were used as the reinforcement fiber for an eco-composite made from wetlaid non-woven mats using polyethylene terephthalate (PET) fibers as the binding fibers. These eco-composites, containing up to 70 wt.% bamboo fibers, were compression molded and tested using dynamic mechanical analysis (DMA) in three-point-bending mode. The thermal behavior of the consolidated PET matrix was analyzed using a DSC. While all composites exhibited very good mechanical properties, the one with 40 wt.% bamboo fibers displayed the highest modulus. The glass transition activation energy calculated from time-temperature superposition suggests that some components from bamboo or moisture lowered the activation energy as the bamboo content increased.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
