The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
This work investigates improvement techniques used with 3D printed metal parts during the infiltration treatment. By extending the infiltration cycle and applying a planar contact surface to the face of a sample, reductions in roughness of 76% are possible. The goal is to produce injection mold tooling with an acceptable surface quality without performing a secondary machining process.
The use of UV coatings, inks, and adhesives on thermoset and thermoplastic substrates continues to grow at a rapid rate. UV and electron beam curing has moved from primarily curing of inks to functional and decorative coatings. One of the areas with the highest growth rate is the use of industrial coatings on 3D parts. Processing of 3D part presents a number of challenges – the critical process challenge is that UV curing requires line-of-sight to achieve activation and cure.
Unless it can be properly crystallized, the field of applications for poly(lactic acid) will be limited by its low glass transition temperature. This paper discusses different strategies that can lead to partial crystallization within typical polymer processing conditions. X-ray techniques and DSC analysis are used to access the crystalline content developed in various molding and extrusion conditions and as a function of plasticizer and nucleating agent content.
Witold Brostow, Wunpen Chonkaew, Reza Mirshams, Ashish Srivastava, May 2007
For a number of polymers with different chemical structures and different properties, we have determined scratch resistance and sliding wear. We have determined cross section areas of the grooves including the groove and side top-ridge areas. The nanohardness of the polymers was also determined using nanoindentation testing both inside and outside the grooves. A relationship between the hardness and the groove areas has emerged.
A series of colorants including yellows, reds, blues and greens have been evaluated when processed with monomeric and oligomeric HALS in PP and HDPE. Comparisons have been done in masstone and tint looking at effects on color shift and strength.
Jennifer K. Lynch, Thomas J. Nosker, David Ondre, Mark Mazar, Patrick Nosker, May 2007
A comparison between commercially available and a newly developed thermal management coating applied to steel substrates is presented. A successful coating must protect a thin 76 by 152 mm steel plate during a direct flame test and withstand low temperature flexural tests without cracking or delaminating. The only coating to meet both requirements is the newly formulated composite consisting of fiberglass in a silicone matrix.
Advances in vibration welding tooling and machinery will offer manufacturers of center consoles a cost effective alternative to current methods. This concept will offer improved manufacturing flexibility and enhance overall performance. We will discuss the tooling and machine concept. This concept is the first of its kind and addresses the issues associated with welding multiple thermoplastic parts in a single operation using the vibration welding process. The tooling and concept are patent pending.
Yong Yang, Jiong Shen, Jintao Yang, Chuntai Liu, L. James Lee, May 2007
Polystyrene (PS) thin films were spun-coat on graphite and silicon oxide surfaces to resemble the polymer-substrate interface in carbon and organoclay based nanocomposites. The film thickness was varied and the apparent glass transition temperature (Tg,a) were investigated by using nanoparticles embedding technique. The PS on these substrates shows different Tg,a profiles, depending on the polymer-substrate interactions. These results will provide valuable guides for rational design of new polymer nanocomposites.
Sharkskin and melt fracture phenomena have been investigated in two commercial biodegradable polyesters– aliphatic-aromatic co-polyester (AAC), poly(lactic acid) (PLA) and their blends. The study was conducted in a two bore capillary rheometer. It was observed that at high shear rates and stresses PLA exhibits sharkskin and gross melt fracture, while AAC exhibits only gross melt fracture. Experiments indicate that the blends exhibit both phenomena and that blending is beneficial for postponing the onset of flow instabilities to higher shear stresses.
Rajesh P. Paradkar, Jing Li, Georg Bar, Hoang Pham, Clive Bosnyak, May 2007
In any polymer blend system, the nature and thickness of the polymer interface can have a significant influence on the overall performance of the blend. AFM in tapping mode (TMAFM) was employed to establish a systematic methodology to quantitatively measure the relative interface thickness in coextruded multilayer films.
This paper presents photografting as a surface modification method to provide permanent wettability improvement to deep-groove polypropylene (PP) fibers. We also describe approaches to evaluate the wettability of these fibers and the wicking performance of fiber bundles when polyacrylamide (PAAm) was grafted onto the fibers. In this study, the concentration of the monomer and the UV-exposure time were altered to examine the effects of those variables on fiber hydrophilicity. Results showed lower water contact angle and improved wicking capacity upon modification with PAAm.
Sarah E. Morgan, Paul J. Jones, Samuel J. Tucker, Jeffrey S. Wiggins, May 2007
Joining and adhesive properties of polymeric composites are of critical importance for emerging applications in the aeronautical, aerospace and marine industries. Traditional macroscopic adhesion testing techniques evaluate macroscopic properties of materials, with limited information on the molecular level processes that control actual performance. Nanomechanical and nanotack evaluations utilizing advanced nanoprobe techniques of polymer/fiber composites reveal differences in performance at the molecular level.
Youngjoon Ahn, Hyukrok Kwon, Kee-Kahb Koo, Jae Wook Lee, Hyounsoo Kim, May 2007
Highly filled polymeric materials exhibit complex rheological properties. In this study the rheological characteristics of highly filled suspension based on ethylene octane copolymer binder and Dechlorane filler were studied. Steady shear and thixotropic behaviors are discussed.
Jaehyung Ju, Roger J. Morgan, J.N. Reddy, May 2007
Thermal residual stresses, internal fuel pressure and acceleration stresses during launch stage were evaluated and quantified for cryogenic composite fuel tank design. Fuel leakage induced temperature variation through laminate thickness after initial cracking was applied to a progressive failure analysis. Comparison of the results with conventional failure analyses was performed. Critical temperature and pressure conditions for failure initiation and whole laminate cracking were found based on the failure analysis.
The luminance of an injection molded V-groove light-guide plate (LGP) was found to be affected by the depth of melt filling of the grooves. Imperfections in filling are influenced by local pressure and temperature histories. The measurements of the depth of melt filling were carried out at different locations using two optical grade polycarbonate (PC) moldings obtained at various processing conditions.
The outermost surfaces of plants are covered by a cuticular membrane which modulates the interactions of the plant with its environment and provides a protective barrier to pathogens. As this interface is a composed primarily of a biopolymer, physical methodologies for their study of polymer mechanical behavior and chemical make-up can provide molecular level details of these systems. In this paper we will briefly describe so important questions in plant biology and the methodologies needed to address these problems which can be found in polymer and physical chemistry.
Myoungbae Lee, James E. McGrath, Donald G. Baird, May 2007
Sulfonated poly (arylene ether sulfone) copolymer has been shown to be a promising material for proton exchange membranes for fuel cell via a lab-scale batch solution casting followed by a mild radiation drying. The effects of the conditions of intense forced convection air on the morphology and performance of this copolymer film have been investigated for industrial production.
A mathematical model and computer simulation describing the constant heat sealing process for linear, semi-crystalline polymer films has been applied to heat sealing process optimization. Among the applications explored are the identification of a sealant resin melt index range that ensures maximum heat strength achievement for a prescribed dwell time, the development of sealing conditions for controlled frangibility seals, and heat sealing equipment specification and selection.
J. Huang, D.G. Baird, G. Fan, Z. Zhang, A. Badami, S. Takamuku, J.E. McGrath, May 2007
A continuous solution film casting process was studied for manufacturing novel polymer membranes for PEM fuel cells. A lab reverse roll casting machine was built and used to cast membranes with typical thickness of 25 micron to 50 micron. Investigation was made to establish the casting and drying conditions to produce voids-free, uniform membranes with desired thickness. The proton conductivity, mechanical properties and morphology of the membranes were evaluated.
Xiaoming Chen, Thanasis D. Papathanasiou, May 2007
Direct numerical simulations are conducted in two dimensions to compute the permeability of membranes filled with aligned flakes. The effects of flake aspect ratio, volume fraction, spatial distribution and size dispersion are examined. Lots of simulations have been carried out using a fast multipole-accelerated boundary element method, and the results are compared to some of the existing models.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
