The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
Patrick Mather , Sadhan Jana , Prithu Mukhopadhyay, May 2009
Abstract #1: Design, Fabrication and Applications of Polymer Microfluidic Biochips
Microtechnology is initiated from the electronics industry. In recent years, it has been extended to micro-electro-mechanic system (MEMS) for producing miniature devices based on silicon and semi-conductor materials. However, the use of these hard materials alone is inappropriate for many biomedical devices. Soft polymeric materials possess many attractive properties such as high toughness and recyclability. Some possess excellent biocompatibility, are biodegradable, and can provide various biofunctionalities. I will first give a brief overview of major activities in our center on micro/nanomanufacturing of polymeric materials and microfluidics. An enzyme immunoassay chip will be discussed as an example for a low-cost and mass-producible lab-on-a-chip platform for molecular and biological analyses. The platform is a microfluidic CD for Enzyme-Linked Immunosorbent Assays (ELISA) that reduces cost, accelerates results, and improves reliability of analyses for food borne contaminants, cancer diagnoses and environmental contamination. The presentation will cover (1) optimization and integration of the critical microfluidic and biochip packaging methods developed for CD-ELISA applications, (2) development of manufacturing and detection protocols for the CD-ELISA chips, and (3) evaluation of the performance of CD-ELISA's by validating testing for food borne pathogens and cancer cytokines.?ÿ
?ÿ
Abstract #2: Bio-applications of Microfluidics: A flexible microfluidic device to characterize bacterial biofilms
We characterize the viscoelasticity of bacterial biofilms by means of a flexible microfluidic device. The biofilms are comprised of Staphylococcus epidermidis and Klebsiella pneumoniae.?ÿ The presence of implanted foreign bodies such as central venous catheters is a key risk factor for infection by bacteria of this kind.?ÿ Because of the sensitivity of biofilm properties to environme
E. Roy , M. Geissler , T. Veres , M.M. Dumoulin, May 2009
The development of disposable microfluidic devices for rapid point-of-care applications has become central to progress in medical diagnostics and a variety of other fields. Microfluidics is the technology of engineering flow at the micrometer scale, making it possible to perform multiple operations on a single chip. The use of these systems is attractive because they promote reduced sample consumption and analysis time without being restricted to standard laboratory settings. To this end, lab-on-a-chip (LOC) systems have mostly been shown to function in conceptual ways, yet their commercialization and widespread use has been hindered by a number of challenges, which include materials and low-cost fabrication technologies as primary concerns.
Dr. Mike Zimmerman , Chris Lee , Dan Ward , Eric Paszkowski , Rick Boisjoly , Jim Elliott , Michael McGee, May 2009
Recent developments based on a novel thermoplastic Liquid Crystal Polymer (LCP) molecule and compound formulation have led to a new material which can exceed the properties of traditional plastics and demonstrate metal-like properties for structural applications. Developed with a very high modulus (>20,000MPa), tensile strength (125 MPa) and an extremely high strength-to-weight ratio, this material is isotropic and has a tailored Coefficient of Thermal Expansion (CTE) of 17x10-6/?øC matching aluminum and steel. The material has balanced dimensional stability and ultra-low shrinkage (0.05%) with high temperature stability up to 420?øC. These metal-like properties have been identified as a metal replacement material for structural applications in a variety of applications and markets.
As issues regarding environmental protection and sustainability have moved higher on public and
political agendas, the demand for PVC pipe has also risen. The current North American market for PVC
pipes and fittings exceeds six billion pounds annually and PVC pipes account for the majority of new
water and wastewater pipelines. Indeed, the PVC pipe industry owes much of its success to
environmentalists and the environmental movement. More importantly, our environment has
benefited immensely as a result of the widespread use of PVC pipe.
Calcium zinc liquid stabilizers can replace other mixed metal stabilizers in flexible
PVC compounds. Ca/Zn liquids are a sustainable and low toxicity option
compared to barium, cadmium, and tin based stabilizers.
Calcium zinc liquid stabilizers can replace other mixed metal stabilizers in flexible
PVC compounds. Ca/Zn liquids are a sustainable and low toxicity option
compared to barium, cadmium, and tin based stabilizers.
William D. Arendt | Dr. Mak Joshi | Jason Butt | Yvonne Berry-Walker, May 2009
PowerPoint Presentation at Vinyltec Conference 2009.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
