The SPE Library contains thousands of papers, presentations, journal briefs and recorded webinars from the best minds in the Plastics Industry. Spanning almost two decades, this collection of published research and development work in polymer science and plastics technology is a wealth of knowledge and information for anyone involved in plastics.
Multiaxial assessment methods have proved to be a useful tool in the fatigue analysis of metallic components. Fatigue analysis of composites presents additional challenges due to the anisotropy and non-homogeneity of the materials. This presentation considers how multiaxial assessment methods may be extended and applied for fatigue analysis of fibre- reinforced composite materials.
This presentation provides a state-of-the-art overview on continuous fiber reinforcement laminates and tapes as overmolded inserts for enhancing structural capability of injection molded polyamide. The talk will highlight the design and manufacturing development of the world’s first seat pan made from a thermoplastic laminate with continuous fiber reinforcement.
The potential of exfoliated graphene nanoplatelets (GnP) to increase the barrier properties of high-density polyethylene (HDPE) to oxygen and fuel was assessed. The mechanical properties (tensile flexural impact resistance) thermal stability and electro-conductivity of GnP-HDPE composites were studied as well. Those properties were related to the properties of the platelets (size aspect ratio) and the quality of their dispersion in the HDPE matrix
Continuous glass fiber-reinforced structural thermoplastic composites can be made with reactive resin systems using structural molding process such as resin transfer molding. By tailoring glass sizing chemistry composite properties can be improved significantly through maximizing the bonding between reinforcing fiber and resin matrix .
Glass carbon aramid and natural fibers of every type and consistency can be successfully handled and precisely placed in large or small molds and formed into a preform in dozens of different applications. In each application the preform is then placed into a mold for the application/ injection of a thermoset resin to complete a composite part. The production equipment required to ensure a fast cycle time and a high quality part is described along with important considerations for the equipment.
Thermosetting plastics used today are not recyclable simply because they were never designed to be in the first place. However there is nothing inherent about the design of the plastics that precludes them from being re-designed to be recyclable/reusable materials. A general overview of recyclable epoxy technology is presented including the underlying chemical principles that enable recyclable epoxy and recyclable carbon fiber composites.
New software design tools and scaleable production technology allows automated tailored fiber placement (TFP) to be used for high-volume preform production. Tailoring the fiber orientation and fiber placement/distribution within the part enables better utilization of the fiber strength and therefore improves performance of the part. Various application examples and preform designs will be presented along with resulting benefits.
This presentation focuses on fillers that could be used for lightweight sheet moulding compound (SMC) applications. In particular a focus on the density of the particles will be made as well as the ecological factor of the use of by-products from biomass. Preliminary testing has been made on the processing of local (Ontario Canada) derived agricultural by-products to see if biomass in different forms could potentially be a suitable substitute for glass bubbles in low-mass SMC formulations.
Modeling the behavior of short-fiber reinforced thermosets during the molding process remains one of the most difficult challenges for successful thermoset part design. This presentation covers examples of thermoset molding best practices and explains how advanced simulation techniques can help predict flow behavior and overcome issues frequently encountered with short-fiber thermoset molding. Factors considered include part geometry thermodynamics molding pressures and fiber orientation.
Accurately analyzing and predicting the mechanical behavior of components made from fiber-reinforced thermoplastics is complex because the fibers are individually oriented during injection molding. Finite-element analysis often uses isotropic material models. Results can be improved if local fiber orientations are considered with anisotropic material properties. This analysis process and a practical application are presented.
This presentation describes a new class of resin aromatic thermosetting copolyester (ATSP) which shows high temperature stability flame resistance and adhesive properties. Carbon fiber helps in stabilizing the nemetic phase in the liquid crystalline melt. The morphology of novel aromatic thermosetting copolyester in the presence of carbon fibers will be described and the presence of crystallinity which helps in improving the fracture toughness of these structures will be discussed.
A family of new epoxy resin systems will be introduced that meet the requirements of automotive production and performance. Also an outlook will be given about what one can expect from a dedicated development partner and supplier.
A novel algorithm to measure fiber-length distribution was implemented. The fiber-orientation distribution within a long- fiber thermplastic (LFT) charge was measured using micro- computerized tomography (?-CT). Using a 3D numerical- simulation package Moldex3D the influence of the initial fiber orientation within an LFT strand was evaluated.
A methodology for the rapid adoption of long-fiber thermoplastic (LFT) composites in the industry is outlined. Examples of recent metal-to-composite conversions are given to illustrate the innovation process.
Polymer composites are the key for lightweight construction and enable automotive producers to reduce fuel consumption and emissions and fulfill governmental requirements. Today processes and materials are available to produce polymer composites with an excellent balance of cost and performance. This tutorial will focus on processing technologies for the production of polymer- matrix composites. Advantages and challenges of the manufacturing of thermoplastic and thermoset composites parts will be highlighted.
Kim McLoughlin Senior Research Engineer, Global Materials Science Braskem
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Kim drives technology programs at Braskem to develop advanced polyolefins with improved recyclability and sustainability. As Principal Investigator on a REMADE-funded collaboration, Kim leads a diverse industry-academic team that is developing a process to recycle elastomers as secondary feedstock. Kim has a PhD in Chemical Engineering from Cornell. She is an inventor on more than 25 patents and applications for novel polyolefin technologies. Kim is on the Board of Directors of SPE’s Thermoplastic Materials & Foams Division, where she has served as Education Chair and Councilor.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Gamini has a BS and PhD from Purdue University in Materials Engineering and Sustainability. He joined Penn State as a Post Doctorate Scholar in 2020 prior to his professorship appointment. He works closely with PA plastics manufacturers to implement sustainability programs in their plants.
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Tom Giovannetti holds a Degree in Mechanical Engineering from The University of Tulsa and for the last 26 years has worked for Chevron Phillips Chemical Company. Tom started his plastics career by designing various injection molded products for the chemical industry including explosion proof plugs and receptacles, panel boards and detonation arrestors for 24 inch pipelines. Tom also holds a patent for design of a polyphenylene sulfide sleeve in a nylon coolant cross-over of an air intake manifold and is a Certified Plastic Technologist through the Society of Plastic Engineers. Tom serves on the Oklahoma Section Board as Councilor, is also the past president of the local Oklahoma SPE Section, and as well serves on the SPE Injection Molding Division board.
Joseph Lawrence, Ph.D. Senior Director and Research Professor University of Toledo
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Dr. Joseph Lawrence is a Research Professor and Senior Director of the Polymer Institute and the Center for Materials and Sensor Characterization at the University of Toledo. He is a Chemical Engineer by training and after working in the process industry, he has been engaged in polymers and composites research for 18+ years. In the Polymer Institute he leads research on renewably sourced polymers, plastics recycling, and additive manufacturing. He is also the lead investigator of the Polyesters and Barrier Materials Research Consortium funded by industry. Dr. Lawrence has advised 20 graduate students, mentored 8 staff scientists and several undergraduate students. He is a peer reviewer in several journals, has authored 30+ peer-reviewed publications and serves on the board of the Injection Molding Division of SPE.
Matt Hammernik Northeast Account Manager Hasco America
A Resin Supplier’s Perspective on Partnerships for the Circular Economy
About the Speaker
Matt Hammernik serves as Hasco America’s Northeast Area Account Manager covering the states Michigan, Ohio, Indiana, and Kentucky. He started with Hasco America at the beginning of March 2022. Matt started in the Injection Mold Industry roughly 10 years ago as an estimator quoting injection mold base steel, components and machining. He advanced into outside sales and has been serving molders, mold builders and mold makers for about 7 years.
84 countries and 85.6k+ stakeholders strong, SPE
unites
plastics professionals worldwide – helping them succeed and strengthening their skills
through
networking, events, training, and knowledge sharing.
No matter where you work in the plastics industry
value
chain-whether you're a scientist, engineer, technical personnel or a senior executive-nor
what your
background is, education, gender, culture or age-we are here to serve you.
Our members needs are our passion. We work hard so
that we
can ensure that everyone has the tools necessary to meet her or his personal & professional
goals.
Need help from SPE Headquarters?
SPE HQ provides a range of services to Chapters. If you are a chapter and need HQ services (i.e.,
event registration - full list of HQ services can be found here), please fill out and submit the HQ services request form found
here: www.4spe.org/HQservices.
IMPORTANT! If you are simply looking to post your
event on SPE's calendar, please click the "Submit an Event" button below. All events
submitted for inclusion in the SPE calendar are subject to approval.
Going to a SPE event?
If you are going to a SPE event and need a Visa invitation letter, please submit your request for a Visa Invitation letter.
SPE Members receive discounted rates on all event registrations. Not a member of SPE? Join today!
How to reference articles from the SPE Library:
Any article that is cited in another manuscript or other work is required to use the correct reference style. Below is an example of the reference style for SPE articles:
Brown, H. L. and Jones, D. H. 2016, May.
"Insert title of paper here in quotes,"
ANTEC 2016 - Indianapolis, Indiana, USA May 23-25, 2016. [On-line].
Society of Plastics Engineers, ISBN: 123-0-1234567-8-9, pp. 000-000.
Available: www.4spe.org.
Note: if there are more than three authors you may use the first author's name and et al. EG Brown, H. L. et al.
